INVESTMENT SPENDING 1997-2009 (%)
|
Machinery |
US$ 273 million |
63% |
Land |
US$ 67 million |
15% |
Building |
US$ 63 million |
15% |
Other(*) |
US$ 28 million |
7% |
Toplam |
US$ 431 million |
100% |
Other(*): Furniture, fixtures, computers, software and vehicles.
In 2009 investment expenditure of US$ 26 million was implemented.
.In 2009, a Goss Ht-70 printing machine was replaced with a newly purchased Goss Uniliner printing machine at the Doğan Printing Center (DCP). Goss Uniliner is able to print 40 pages in color. A new newspaper conveyor system, NGR (Müller Martini) was established to serve this machine.
Two new towers were added to the second Goss Ht-70 printing machine, its software system was completely changed, some units were revised and its color printing capacity was raised from 24 colored pages to 40 colored pages. With this revision and the addition of the towers, in 2009, Istanbul DPC’s total printing capacity for colored pages increased 25% over 2008, rising from a total of 160 to 200 pages in color.
The third Ht-70 printing machine will also be enhanced with two additional towers in 2010, thereby bringing its colored printing capacity up from 24 to 40 pages. Consequently the total colored printing capacity will rise 8% over 2009.
- In 2009, at Ankara DPC, a new Agfa CTP plate output channel was added to the present line, boosting plate output by 50%. In 2010, an industrial waste water treatment facility will be commissioned.
- At Izmir DPC, a new Agfa CTP plate output channel was added to the present line, enhancing plate output by 50%.
- At Adana DPC, a new Ingersoll Rand compressor was purchased and installed. The construction of a Chemical Treatment Facility was started. The construction of the Chemical Treatment Facility will be completed in 2010.
- At Antalya DPC, a third Agfa CTP plate output channel was started to be constructed in 2009 and was commissioned in January 2010, enhancing plate output by 50%. In April 2010, a waste water treatment facility will be commissioned.
- At Trabzon DPC, in 2009, two new Agfa CTP plate output channels were installed, thus enabling all plates to come out from CTP. In 2010, the cylinders of the printing machine units will be revised and double plates will be replaced with single plates.
|
